Steel Weld Nut.
Description
Production process:
General steps: plate - Pickling - cold drawing - cold upsetting.
1. The disc element is made of steel embryo by heating and rolling. The high carbon, medium carbon and low carbon disc elements are classified according to the carbon content. The high carbon disc element is the one with carbon content more than 0.45%, the medium carbon disc element is the one with carbon content between 0.22% and 0.45%, and the low carbon disc element is the one with carbon content less than 0.22%. When the raw material of disc element is processed to produce nut, it is easy to break. Therefore, the material must be softened by heat treatment to make its metallographic structure spheroidized, which can withstand the stamping during processing. The treated wire is spheroidized wire.
2. Acid pickling uses acid solution to remove oxide scale and rust on steel surface.
3. Cold drawing and cold upsetting need special equipment.
|
Product Name
|
Welded nut
|
|||
Mechanical property |
GB/T3098.2 | |||
|
Grade
|
4.8/6.8/8.8/10.9
|
|||
| Hardness | HRC 26-36 | |||
|
Material
|
Steel | |||
|
Surface Treatment
|
Plain
|
|||
|
Packing detailes
|
Woven Bag,Carton,Pallets,or as your requests.
|
|||
|
Delivery Method
|
by sea,by air or by express service
|
|||
Factory Diaplay
1. Q: Could i put my own logo on it?
A: Sure, customers' logo can be printed or put on the items.
2. Q: how about the certificates
A: ISO ROSH etc.
3. Q: Could i buy 1pc sample first and small order ?
A: Of course, support sample order and small order, especially for new customers under certain
condition.
4. Q: How much for 1pc sample ?
A: Sample can be provided free .
